Galvanized Karfe Waya Hot tsoma Galvanizing / Lantarki / Sanyi Galvanizing
Siffa:
- Santsi
- Mai haske
- Kyakkyawan Tsawaitawa
Babban Aikace-aikacen:
- Kebul0.25-8.00mm
- Gabion waya raga:2.00-6.00mm
- Matsakaicin:1.5-4.7 mm
- Yin shinge: 0.3-4.0mm
- Igiyar Waya: 0.6-4.0mm
- Waya raga: 0.3-5.0mm
Wasu cikakkun bayanai:
- Diamita Waya:0.13-10.0mm
- Surface: Galvanizing Hot tsoma Galvanizing, Lantarki / Sanyi Galvanizing
- Tufafin Zinc: 8-1000G / M2 (Nauyi tutiya shafi waya / Standard tutiya shafi waya)
- Ƙarfin Ƙarfin Ƙarfi: 300-2000MPA
- Shiryawa: Spools (1KG-100KGS)
- Coils (1KG-1000KGS)
- Daidaito:ASTM, BS, JIS, KS, GB, AS da dai sauransu.
- Port:Tianjin Port, China
- Ƙarfin samarwa:Ton 4000/ Watan
- Moqku: 1 ton
- Misali: Bayar
- Sharuɗɗan Biyan kuɗi:T/T, L/C, D/P
Zafafan Girman Waya don ragar Gabion:
| Waya Dia. ku: mm | Haƙurin Waya: mm | Tufafi: G/M2 | Tsawaitawa: % | Shiryawa: Kgs |
| 2.00mm | ± 0.03mm | 210 | >10% | Kamar yadda Buƙatun Abokan ciniki |
| 2.20mm | ± 0.03mm | 230 | >10% | Kamar yadda Buƙatun Abokan ciniki |
| 2.70mm | ± 0.03mm | 245 | >10% | Kamar yadda Buƙatun Abokan ciniki |
| 3.00mm | ± 0.03mm | 245 | >10% | Kamar yadda Buƙatun Abokan ciniki |
| 3.40mm | ± 0.03mm | 260 | >10% | Kamar yadda Buƙatun Abokan ciniki |
Gilashin zinc na ƙarfe da aka yi amfani da shi ta hanyar galvanizing shine hanya mai mahimmanci don yaki da lalata na karfe.Wayar galvanized da aka yi amfani da ita don dalilai na masana'antu na gaba ɗaya yana samuwa tare da ko dai daidaitaccen suturar galvanized ko kuma murfin galvanized mai nauyi.
Daidaitaccen suturar galvanized sun fi santsi amma ƙasa da juriya fiye da manyan kayan galvanized kuma galibi ana amfani da su don aikace-aikacen sarrafa waya na yau da kullun.Wasu masu amfani na ƙarshe sun haɗa da keji, riƙon guga, masu rataye riguna da kwanduna.
Ana amfani da suturar galvanized mai nauyi a cikin yanayin da lalata yanayi ya yi tsanani.Ƙarshen masu amfani sun haɗa da layin tallafin amfanin gona ta amfani da sinadarai, shingen tafkin ko tarun sarka a yankunan bakin teku.
Kula da inganci:
Muna amfani da tsarin kula da inganci gabaɗaya.Kowane danyen abu;samfuran da aka kammala da kuma waɗanda aka gama ana duba su kuma a adana su.Ana amfani da bayanan waƙa daga samfurin ƙarshe zuwa injin niƙa na farko.
Kunshin:
1) Duk samfuran suna cikin marufi masu dacewa.
2) Za a iya saduwa da bukatun musamman na abokan ciniki don marufi.
3) Ta iska;ta ruwa da babbar mota.
